HOW TO INSTALL A LEUPOLD CUSTOM DIAL
The Leupold Custom Dial System® (CDS) builds your ballistics right into the riflescope dial. No more holdovers, bullet drop reticles, or ballistic calculators. Just quick, accurate shots every time. Watch the video below to find out how to install your Leupold custom dial.
HOW TO INSTALL A LEUPOLD CDS DIAL: STEP-BY-STEP
- Before we begin, make sure your firearm is unloaded and there is no ammunition present.
- Prior to installation, your rifle should be zeroed at the distance indicated when ordering your custom dial.
- Remove the original dial by loosening the 3 set screws located on the knurled rim of the dial.
- Lift the dial upward and clear of the adjustment mechanism.
- Place your new CDS dial on the adjustment mechanism, and turn it clockwise until the Zero Distance is aligned with the witness mark on the rifle scope, and the dial hits the Zero Stop.
- Tighten the set screws to a max torque of 5 in-lbs.
- And now, your Custom Dial System is installed and ready to go.
HOW TO INSTALL A SPEEDSET CUSTOM DIAL
The VX-6HD Gen 2 utilizes the all-new CDS-SZL2 Speedset Dial, allowing for quick re-zeroing in the field without the use of tools. For information on how to properly install your custom Speedset Dial for the first time, please watch the video below.
Issues or questions about your custom dial? Give us a call at 1-800-Leupold and our team will get you squared away in no time.
ADDITIONAL SUPPORT
HOW TO SIGHT IN A SCOPE
Being able to properly sight in or “zero” a scope is one of those skills that comes in extremely handy, but it can also be incredibly frustrating when it’s going wrong. Don’t worry, though, we’ve got you covered.
HOW TO ADJUST YOUR RIFLESCOPE
A riflescope can be an intimidating piece of gear. A lot of people have it mounted at the local gun shop then never touch it again. But if you familiarize yourself with a couple of key techniques, adjusting your riflescope can be quick and painless.