RM Sako 1-in Low is rated
Rated 1 out of
Not a very good set of rings....
Leupold has apparently changed the design of these rings without updating the website. The new rings have a giant L cast into the top of the ring that looks horrible.
On top of that they changed the clamping mechanism and clamping screw design.
Fit and finish is also not as good collectively as the older design ring shown on Leupold's site. I am planning to return my rings to buy a set of Talley rings in place.
The previous model of CZ ring made by Leupold was fantastic. I advise you to look for a used pair if you really want Leupolds!!
Date published: 2016-08-15
Rated 5 out of
old rifle guy
Good quality ring mounts.
These rings work great as long as you are putting them on an 11mm dovetail and not attempting to fit them on a 13mm dovetail. I also purchased a pair of the 11mm rings for a CZ 453 when I ordered the rifle. When the rifle and rings arrived I discovered that the rifle was a 13mm dovetail and the rings fit much like the photo in the review above. I thought all CZ 22 rifles were 11mm bases but I was wrong!
I got a pair of Leupold 13mm rings and voila all was fine and they fit the rifle's dovetail base like a glove.
I find it disappointing that there is such a poor selection of different European metric rings like 11mm and 13mm given the increasing popularity of rifles with this mounting system.
Date published: 2017-04-12
Rated 4 out of
Works ok for me
I got a set of these for my FX-1 and they seem to work ok. I don't have any qualms about the "L" in the top of the rings, but that's my personal taste. Yours may be different.
Date published: 2016-09-04
Rated 5 out of
These rings are perfect in every way. The quality, fit, tolerances, finish all exude the highest standards of excellence. Don't listen to the poor review of someone who doesn't like the letter L. Sounds like a phony review and no reason for a 1 star rating. There are no better rings out there. Worth every penny.
Date published: 2017-01-21
Rated 1 out of
Poorly made rings
These rings were ment to mont a scope on my cz 455. The packaging specifically said for cz. The clamp on the rings is to short resulting in rings that leans off to the side when mounted to the receiver. At the price leupold charges for these ring they could at least mount square to the rifle.
Date published: 2017-01-28
Forged and Machined steel construction.
Versatile, and available for many different rifles.
will almost always use MEDIUM rings in a given style. In certain instances, 45mm scopes may require HIGH rings.
will almost always have enough clearance with LOW rings in a given style, though MEDIUM rings will give slightly more clearance, particularly when using a barrel with a thicker shank portion or a heavier contour.
will almost always use LOW rings in a given style. Again, in certain instances of a heavy barrel or heavy shank portion of a custom barrel, MEDIUM rings may have to be used, but LOW rings will almost always suffice.
VX-3L 56mm Riflescopes
will almost always use LOW rings, but in some instances, where there is a very pronounced barrel shank or relatively heavy barrel, they will use MEDIUM rings.
The Ringmounts does not support all scopes. Find the recommended bases and rings for your firearm and scope with our Mounting System Finder.