Mark 8 IMS 34mm Mounting System
The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to AR-style rifles; scope height and eye relief. From the Mark 1™ to the Mark 4®, each aluminum IMS cantilever design mounts directly to the firearm’s Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the need for risers or specialized optics with shortened eye relief. All Leupold IMS products are tested to endure the rigors of the field and are covered by the Leupold Full Lifetime Guarantee.
Model Options Starting prices are USA only, and are our Suggested Retail Price.
Mark 8 IMS 34mm Mounting System is rated out of 5 by 6.
Rated 5 out of 5 by BigBoreFanatic from Excellent Mount! I purchased this mount a few months ago to mount a Leopold Mark AR scope to my AR-15. I couldn't be happier with this mount. Initially I mounted it and finger tightened the screws. This was not sufficient so I applied Loctite to the screws before tightening them down. That fixed the issue of the mount working itself loose while shooting. I could not be happier with this combination of scope and mount. There is no movement of my scope regardless of how many times I have broken down the rifle and re-assembled. It has also held my zero when I have removed the mount entirely and re-attached (with more Loctite). I have found this mount to be an excellent mount at an price, but particularly an excellent value at the price I paid for it.
Date published: 2016-06-23
Rated 5 out of 5 by don_swazy from Solid mount, great price Great machining and good clearance for 40mm scope on a standard AR with A2 hand guard with probably enough room for a 50mm. Awesome mount!
Date published: 2016-09-26
Rated 5 out of 5 by Jim W from Excellent product This mount works great on my Ruger SR-762, rock solid!
Date published: 2016-05-23
Rated 5 out of 5 by RC345 from By Far Greatest mount since Sliced Bread Made in the USA.... Top Notch all the way around. Excellent eye relief, Bolts get the job done of holding everything steady. Built Solid, never a problem. I would highly recommend using a quality mount, like the Mark 2 IMS...
Date published: 2016-09-06
Rated 5 out of 5 by CK two from Solid Mount This mount is great. It's a solid piece that clamps my Mark AR scope on my rifle. Take the mount off from one rifle to another is a simple task. All that is required is the proper socket or wrench. My only dissapointment is that it is not a quick detachable mount. That would make the mount much eaiser to mount from rifle to rifle. Once the mount has been removed from rifle and remounted, scope stays zeroed.
Date published: 2016-09-27
Rated 5 out of 5 by Mark in Georgia from Great set up for the Springfield Saint Got the AR Mod 1 1.5 X4 firedot mounted on my Saint. Easy to mount and out of the box this combo was dead on. I didn't bore site it just shot at 25 yards, then 75 and then 100. Dead on. Great combination. At 1.5 X there is a slight shadow of the front sight but is is acceptable. Any higher and it goes away. The Firedot is awesome. Highly Recommended
Date published: 2017-05-12
Mark 2 Rail (IMS Mounts)
Mark 2 Rings (IMS Mounts)
Mark 4 Line (IMS Mounts)
Mark 4 Versatility (IMS Mounts)
Mark 4 IMS Screws (IMS Mounts)
Mark 8 (IMS Mounts)
Mark 6 (IMS Mounts)
View All Hunting & Shooting Mounting Systems
Integral Mounting Systems
|Mark 6 IMS 34mm LH Mounting System||$469.00|
|Mark 4 IMS Integral Base||$126.00|
|Mark 6 IMS 34mm RH 20-MOA||$469.00|
|Mark 6 IMS 34mm RH Mounting System||$469.00|
|Mark 8 IMS 35mm Mounting System||$549.00|
|Mark 8 IMS 34mm Mounting System||$549.00|
|Mark 4 IMS 30mm Integral Ring Insert||$153.00|
|New Mark 4 IMS 30mm 20 MOA||$229.00|
|Mark 2 IMS 30mm Integral Mounting System||$159.00|
|Mark 2 IMS 1″ Integral Mounting System||$159.00|
|Mark 2 IMS Integral Rail Mount||$123.00|
|Mark 4 IMS 1″ Integral Ring Insert||$153.00|
|New Mark 4 IMS 30mm||$219.00|
|Mark 4 IMS 20-MOA Integral Rail Insert||$80.00|
|Mark 1 IMS Integral Rail Mount||$70.00|